The gear bearing capacity of the gear with the soft tooth surface of the transmission box is relatively low, but it is easier to manufacture and has good running-in performance. It is mostly used in general machinery with no strict restrictions on transmission size and weight, and small-scale produc

The function of the transmission system is to transmit the power of the engine to the drive wheels. The power output by the engine first passes through the clutch, and after the transmission changes the torque and speed, the power is transmitted to the final drive through the transmission shaft, and finally the power is transmitted to the driving wheels through the differential and the half shaft.

At present, the drive axle of SINOTRUK series heavy vehicles are generall divided into two types - single-stage reduction axle and double-stage reduction axle.The single-stage reduction bridge adopts the central single-stage hyperbolic gear reduction, and thejudgment method isrelatively simple, whic

lnstallation instructions for automobile steering pump:1.The steering pump shall e firmly installed on the pump support to ensure that the flange surface of the pump and the driving installationsurface are on the same plane. The gear driven steering pump must ensure that the number of teeth matches.

Inter-axle differential damage analysis:The inter-axle differential (inter-axle differential) of an automobile is a component that ensures the differential movement of the middle and rear axles. If the inter-axle differential fails, the middle and rear drive shafts become rigidly connected, which wi